CD34⁺ CD38^- subpopulation without CD123 and CD44 is responsible for LSC and correlated with imbalance of immune cell subsets in AML

Acute myeloid leukemia (AML) is regarded as a stem cell disease. However, no one unique marker is expressed on leukemia stem cells (LSC) but not on leukemic blasts nor normal hematopoietic stem cells (HSC). CD34⁺ CD38- with or without CD123 or CD44 subpopulations are immunophenotypically defined as putative LSC fractions in AML. Nevertheless, markers that can be effectively and simply held responsible for the intrinsical heterogeneity of LSC is still unclear. In the present study, we examined the frequency of three different LSC subtypes (CD34⁺ CD38^-, CD34⁺ CD38^- CD123⁺ , CD34⁺ CD38^- CD44⁺ ) in AML at diagnosis. We then validated their prognostic significance on the relevance of spectral features for diagnostic stratification, immune status, induction therapy response, treatment effect maintenance, and long-term survival. In our findings, high proportions of the above three different LSC subtypes were all significantly characterized with low complete remission (CR) rate, high relapse/refractory rate, poor overall survival (OS), frequent FLT3-ITD mutation, the high level of regulatory T cells (Treg) and monocytic myeloid-derived suppressor cells (M-MDSC). However, there was no significant statistical difference in all kinds of other clinical performance among the three different LSC groups. It was demonstrated that CD34⁺ CD38^- subpopulation without CD123 and CD44 might be held responsible for LSC and correlated with an imbalance of immune cell subsets in AML.     

MDA-TOEPGA: A novel method to identify miRNA-disease association based on two-objective evolutionary programming genetic algorithm

The association between miRNA and disease has attracted more and more attention. Until now, existing methods for identifying miRNA related disease mainly rely on top-ranked association model, which may not provide a full landscape of association between miRNA and disease. Hence there is strong need of new computational method to identify the associations from miRNA group view. In this paper, we proposed a framework, MDA-TOEPGA, to identify miRNAdisease association based on two-objective evolutionary programming genetic algorithm, which identifies latent miRNAdisease associations from the view of functional module. To understand the miRNA functional module in diseases, the case study is presented. We have been compared MDA-TOEPGA with several state-of-the-art functional module algorithm. Experimental results showed that our method cannot only outperform classical algorithms, such as K-means, IK-means, MCODE, HC-PIN, and ClusterONE, but can also achieve an ideal overall performance in terms of a composite score consisting of f1, Sensitivity, and Accuracy. Altogether, our study showed that MDA-TOEPGA is a promising method to investigate miRNA-disease association from the landscapes of functional module.     

仿生聚多巴胺对HMX、TATB和铝粉的界面性能改性

为了研究表面改性方法及表面包覆均匀性、浸润性等性状对含能材料的机械感度、界面力学性能以及工艺性能的影响,仿生贻贝黏附蛋白的作用原理,以多巴胺为前驱体,采用一步法使其在含能材料表面聚合形成一层致密牢固的包覆薄膜聚多巴胺(PDA),制备了改性单质炸药(HMX@PDA、TATB@PDA)和改性铝粉(Al@PDA)。通过扫描电子显微镜、X射线光电子能谱和接触角测试仪对改性含能材料的表面形貌、药柱断裂处微观形貌、元素含量以及表面浸润性能进行了表征,采用国军标(GJB-772A-1997)、巴西实验等标准测试方法对改性含能材料的机械感度、拉伸应力-应变曲线等进行了测试,并将实测性能与未改性含能材料进行了对比分析。结果表明,与HMX晶体比较,HMX@PDA晶体的摩擦感度下降30%,特性落高数值增加一倍;与TATB基药柱比较,TATB@PDA基药柱的拉伸强度提高约15%;与Al粉比较,Al@PDA在HTPB液相中24h后可有效减缓沉降。聚多巴胺对晶体完整致密的包覆性能以及含有丰富活性基团的特性,对含能材料的包覆降感、界面力学性能提升和工艺稳定性提升等方面具有显著的界面改性作用。     

高低温循环及对称冲击耦合加载下 炸药的安全性研究

基于一级轻气炮加载装置，研究了高低温循环及对称冲击耦合加载下某黑索今(RDX)基含Al炸药的安全性，计算了缺陷处的内能等参数。结果表明:高低温循环后，炸药试样出现可见的孔隙。对称碰撞加载后，不经高低温循环的试样未发生点火，应力加载峰值为835 MPa，加载时间为35 μs；而经历高低温循环的试样出现点火，点火前应力为242 MPa，加载时间11 μs。高低温循环所产生的缺陷是导致炸药点火的重要原因。     

三维激光扫描技术在矿山主溜井测量中的应用

溜井测量具有一定的隐蔽性和不确定性,测量时有相当的危险性,如何对溜井的空间形态特征和冒落状况等进行量化评判,是所有矿山面临的难题。本文介绍了三维激光扫描技术的作业流程,给出了点云数据处理的过程和方法,并以安徽开发矿业有限公司3#主溜井测量为例进行数据采集和处理分析,建立了主溜井的三维立体模型,计算得到了主溜井需要修复的体积,为溜井的安全治理和维修设计提供了可靠的数据依据。实践结果表明了三维激光扫描技术在溜井测量中应用的可行性和优越性。     

Influence of Different Types of Free Metal Particles on The Properties of SF_6 Insulation

正The defect of free metal particle is very easy to cause insulation failure in sulfur hexafluoride(SF_6)insulated equipment.There is no research about the effect of different metal element particles on the SF_6insulation performance,leading to the lack of theoretical and experimental support for the selection     

超高效液相色谱-串联质谱法测定鱼肉中多种雄性激素和孕激素

目的建立超高效液相色谱-串联质谱(ultraperformanceliquidchromatography-tandemmass spectrometry,UPLC-MS/MS)检测鱼肉组织中10种雄性激素和孕激素的分析方法。方法样品经乙酸铵提取,乙酸-乙腈再提取,无水硫酸钠吸水,QuEChERS净化,经C18柱分离后进行UPLC-MS/MS选择电喷雾ESI正离子模式多反应监测模式下定量分析。结果线性范围在0.4～8.0μg/kg,相关系数达到0.99以上,10种激素的检出限在0.0100～0.200μg/kg之间,方法的回收率在77.3%～114.4%之间,相对标准偏差在0.9%～10.3%之间。结论该方法简单、快速、准确,且检出限低、回收率高,适用于鱼肉组织中雄性激素和孕激素的测定。     

纳米Co/rGO磁性复合吸附材料的制备及对Cu2+的吸附性能

以改进Hummer法制备的薄片状氧化石墨烯(GO)为载体和模板负载钴离子，然后采用原位还原法制得纳米金属Co/石墨烯磁性复合吸附材料(Co/rGO)，并将其应用于对Cu2+的吸附和脱除，以期为高效可复用的铜离子脱除剂的合成与应用提供指导。实验结果证实，Co/rGO复合材料具有超顺磁性，能够很方便的使用磁铁进行分离并在无磁场情况下振荡分散。Co/rGO复合材料对Cu2+具有稳定的吸附/脱附性能，实验条件下对Cu2+的最大吸附容量达到117.5 mg/g且5 min内实现吸附平衡，远优于其原料GO的60 min吸附容量27.6 mg/g。本工作系统考察了NaOH加入量、络合剂种类、溶剂种类等关键因素对Co粒子在rGO载体上形貌和分布特性的影响，比较了不同合成条件下的复合材料对Cu2+吸附效果的影响，并对优选条件下制备的Co/rGO复合材料进行了FT-IR, XRD, SEM表征。研究结果表明，纳米Co/rGO磁性材料对Cu2+的吸附过程更符合Freundlich模型，属于多层吸附。室温下吸附焓ΔH=17.81 kJ/mol，吸附反应平衡常数Kθ=3.65。当初始Cu2+浓度为39.22 mg/L时，对Cu2+的吸附率为93.47%，五次吸附/脱附循环后吸附容量仍保持在初始值的94%，每次吸附后溶液中残余Cu2+浓度均满足钴电解液对杂质铜离子的浓度去除要求(5 mg/L)或GB 8978-1996污水综合排放标准3级(2 mg/L)，有望在相关领域发挥作用。     

基于ANSYS的带簧油封径向力分析

提出一种考虑弹簧初应力的油封径向力有限元计算方法,即通过二维轴对称模型实现带簧油封的径向力计算。该模型中通过圆管来等效油封弹簧,并可以实现弹簧初应力现象的模拟;圆管模型的材料属性由2种状态下(弹簧装配在油封上和油封装配在轴上)弹簧的拉力转换得到,转换关系通过试验与仿真相结合的办法获得,最终实现了带簧油封2种状态下的径向力有限元计算。通过径向力测量仪验证计算结果的正确性,同时发现弹簧所产生的径向力并非百分之百转化为油封径向力。     

1Cr18Ni9Ti激光选区熔化成形工艺参数对致密度的影响

采用正交试验,结合典型缺陷形成原因和微观组织,研究了激光选区熔化成形工艺参数(激光功率、扫描速度和扫描间距)对1Cr18Ni9Ti不锈钢致密度的影响,分析了各工艺参数对致密度的影响规律。结果表明,粉末熔化的能量输入密度主要取决于激光功率和扫描速度;在激光功率325~340 W、扫描速度1 000~1 200 mm/s、扫描间距0.12 mm的工艺参数下,SLM技术可制备致密度高于99.9%的1Cr18Ni9Ti不锈钢零件。采用优化后的SLM工艺参数成形1Cr18Ni9Ti不锈钢试棒的力学性能优于QJ501A-98标准,抗拉强度Rm≥709 MPa,屈服强度Rp0.2≥547 MPa,断后伸长率A≥41%。